Installing MAC OS X on a PC (single boot)

Install Mac OS X to Dell M1330 (clean install)

1. Preparation

- iATKOS v5i (OS X 10.5.5) ISO DVD
- Delete all partitions in hard disk

2. Install iATKOS v5i

- insert the DVD
- boot computer from DVD
- Darwin bootloader starts, hit F8 when counting, and type -v then hit enter to continue
- OS X loading from DVD. Once loaded, hit ..> button at the bottom right
- Once top manu bar appears, Utilities --> Disk Utility
- select the disk (on left side), select Mac OS Extended (Journaled) and name it as "Leopard". A new partition under the disk is created
- still select the disk, click partition, resize the Leopard partition to 50GB and apply
- exit Disk Utility
- continue, will find the Leopard (50.12GB) disk appears. Select it. Continue
- Now, DO NOT just INSTALL. Click customize,
Besides the default checked options, just check these following additional options from Customize Install

Bootloader: PC EFI V9
Decrypters: AppleDecrypt
SMBIOS drivers: SMBIOS-EFI Air
ACPI: x86
Drivers: VGA drive: X3100,
Intel AHCI SATA
then done with customize
- install (skip DVD disk check). it will take about 20 minutes.
- Once complete, remove DVD. restart to boot on hard disk (it may ask for turn off PC, so do it)

3. Start Leopard

- Once booting with with hard disk (the first Leopard boot up), it takes very long time (watching the HDD LED is still flashing, though the screen may turn to black). Be patient for at least 30-40min
- Leopard is finally up and running, for the first configuration

4. Keyboard and Mouse recognization

- the m1330 keyboard and mouse pad should be recognized (with ACPI; x86). If not, plug in a USB keyboard and UBS mouse. they should be recognized.
- follow the step until "How Do You Connect?" window, answer not connect to the internet
- Fill in bogus info for registration fields
- Create account by using user (eqian) and my internet password

5. Problems remained:
- Power on booting very slow (could be 30min)